IPC CERTIFICATION COURSES
IPC-A-610 REV. D
WORKER PROFICIENCY CERTIFICATION - 3 DAYS
The outcome of this course is to enable the student to recognize necessary criteria for the accepting or rejecting electronic manufactured. The IPC-610 standard is recognized world-wide as the workmanship standard for the electronics industry. The student will give a comprehensive test at the conclusion of their studies. It incorporates both open and closed book questions. An average score of 70 percent or better must be attained to receive their official IPC certification which will be valid for a period of 2 years from date of certification.
Benefits:
- Certify the competence of your staff
- Brake down the prejudices of communication
- Reinforce industry-best practices
- Compliance with ISO-9000
This course is taught by a Class "A" Instructor recognized by IPC and certified. Students will have a working knowledge of acceptance criteria for all three classifications and the interaction of the standard in the matrix of quality, production, and customer acceptance.
| COURSE FEE |
COURSE CODE |
DATES |
|
$700.00 |
PTRE7054-01 |
09/23-09/25/08 |
|
PTRE7054-02 |
11/11-11/13/08 |
|
PTRE7054-10 |
01/08-01/10/09 |
|
PTRE7054-11 |
03/03-03/05/09 |
|
PTRE7054-12 |
05/12-05/14/09 |
____________________________________________
IPC/WHMA-A-620
OPERATION/INSPECTION CERTIFICATION - 3 DAYS
Requirements and Acceptance for cable and Wire Harness Assemblies. The student will demonstrate satisfactory knowledge of IPC Policies that govern operation or the IPC/WHMA-A-620 Training Certification Program by satisfactory completing an Open Book examination.
GOALS:
Improve individual "discrimination skills"; that is, to improve accuracy of discriminating between "acceptable" or "not acceptable" condition. Tech accept/reject criteria to enhance ability and consistency in correctly applying the criteria.
OUTCOME:
A standard which establishes guidelines for better communication, bring fractions under one measurement format. The Customer, Vendor, Quality Team, Management Team expectations, establishing clean and precise communications throughout the manufacturing process.
CRITERIA:
- Eliminate down time
- Eliminate rework
- Eliminate poor communication
- Increase profits without cost increase
- Increase quality and yield
Course Fee: $535.00
| COURSE FEE |
COURSE CODE |
DATES |
|
$700.00 |
PTRE7057-01 |
09/30-10/02/08 |
|
PTRE7057-02 |
11/18-11/20/08 |
|
PTRE7057-10 |
01/20-01/22/09 |
|
PTRE7057-11 |
03/17-03/19/09 |
|
PTRE7057-12 |
05/19-05/21/09 |
____________________________________________________________
J-STD-001 OPERATOR PROFICIENCY CERTIFICATION
ANSI-APPROVED, DOD ADOPTED COURSE
2 YEAR INTERNATIONAL REGISTERED CERTIFICATION - 5 DAYS
The industry standard program for hand and machine soldering processes and materials requirement and hands-on training.
COURSE OBJECTIVE
Upon completion of this course the graduate will have a through understanding of the requirements and philosphy of J-STD-001C and will possess the knowledge to implement J-STD-001C assembly processess and will develop and demonstrate the soldering skills necessary to assemble products in accordance with J-STD-001C.
PROGRAM PURPOSE
To help electronics manufacturers produce at the lowest possible cost by promoting a greater understanding of the soldering and assembly processes through standardized training. The standard describes materials, methods and acceptance criteria for producing soldered electrical and electronics assemblies
OVERVIEW
Requirements for assembly, soldering, soldered connections, cleaning, coating/encapsulation, rework and verification are defined.
This course is taught by a certified instructor recognized by IPC.
COURSE FEE: $1,125.00
|
COURSE CODE |
DATES |
|
PTRE7059-01 |
10/13-10/17/08 |
|
PTRE7059-10 |
01/19-01/23/09 |
|
PTRE7059-11 |
03/16-03/20/09 |
|
PTRE7059-30 |
06/01-06/05/09 |
_________________________________________________________
IPC-EDU-101/NTCU SOLDLERING CERTIFICATION
3-DAY
This course is an introduction to electronic assembly. The course will cover electronic assembly overview, ESD control, component identification, handlings and mechanical assembly, electrical test and safety standards. DVD and Hands-on training providing smooth transition into hand soldering techniques based on IPC standards.
BENEFITS:
- Certify the competence of your soldering staff for quality systems
- Development of workers proficiency
- Understanding of industry best practices
- Increase staff effectiveness
This course is taught by a certified instructor recognized by IPC.
Certification is portable and good for two years from dates of course completion.
COURSE FEE: $650.00 or can be combined with the NTCu Soldering Certification for a 5 day course totaling $1,100.00.
|
COURSE CODE |
DATES |
|
PTRE7051-01 |
10/06-10/10/08 |
|
PTRE7051-10 |
01/12-01/16/09 |
|
PTRE7051-11 |
02/23-02/27/09 |
|
PTRE7051-30 |
06/08-06/12/09 |
______________________________________________________________
IPC-7711/7721 – REWORK, REPAIR & MODIFICATION OF ELECTRONICS AASSEMBLIES – 5 DAY
This five day skills based course provides participants with an intense, hands-on printed circuit board rework and repair lab coupled with a review of all the applicable procedures outlined in the IPC-7711-7721A Specification.
BENEFITS
Students will demonstrate advanced proficiency in the repair and restoration of
damaged printed circuit board assemblies.
Students will receive a 2 year international registered certificate.
| COURSE FEE |
COURSE CODE |
DATE |
|
$1,125.00 |
PTRE7061-01 |
10/13-10/17/08 |
|
PTRE7061-10 |
02/09-02/3/09 |
|
PTRE7061-11 |
05/11-05/15/09 |
